9/16/2023 0 Comments Pengganti Ic 4017![]() ![]() The idea is that the ceramic services the immediate current demand from the switching CMOS. They are frequently paralleled with a bigger capacitor like a small tantalum. It must be able to supply current quickly meaning low internal impedance. That can result in erratic operation of the CMOS IC.Ī capacitor wired close to the power pins provides a local source that can supply the chip during the immediate switching current demands of the CMOS IC. The result can be a drop in the voltage at Vdd at switching just when the chip needs it most. So just as the CMOS IC demands more current, the wiring conspires to briefly limit the current available. The connecting wires have a little inductance that at the frequencies generated by the switching, resists the sudden increase in current through them. The sudden current demand needs to be serviced from the power supply through wires, board traces etc. When the CMOS logic switches, it requires a short but large pulse of power (compared to its static state). To understand what is going on here is a grossly simplified discussion: A small capacitor across each IC's power pins is good practice.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |